background image

74-07579-000-A 2/96

Page 35

© 1996 Radionics, Inc.

Step

Example Display

Action

6

0019 / t0

..

Now changes can be made to the Access Level
and Time Profile. If no changes are to be made go
to step 8.

7

0019 / t1 

.

To change the Time Profile

 press 0-8 for the

Time Profile you wish to apply. (As soon as you
press a key the display will stop alternating). A
Time Profile of 0, allows for 24 hour access, 7
days a week. Press 

SEL/SAVE

 to confirm the

change. The display will start flashing again.

To change Access Levels

 press

 

 

to toggle

on/off the dot for door 1, and   to toggle on/off
the dot for door 2. Press 

SEL/SAVE

 to confirm

the change.
The example shows key 

0019

 with Time Profile 1

and access through door 2 only.

8

0020 / t1 

.

Present the Editor key/card (it must be the same
one as used in step 1 above) to the EK1000’s
internal reader. The green LED will now go steady
and the next available number will flash.
If you wish to add more keys see 

Adding Several

Key/Cards

 next otherwise press 

ESC

.

9

SEL?

Press 

ESC

 to leave Editor.

Summary of Contents for Easikey 1000

























































Reviews: