Radiometer Analytical TitraLab 870, Reference Manual

Page: 252 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 252
User’s rights The Supervisor and Routine modes set the user’s rights as shown in
the table below:
Figure 43: User’s rights
Supervisor Routine
Create, edit sequence.
Remove all methods from a sequence.
Delete a sequence Yes Yes (if the
Supervisor
gives the
right to),
see
"Demand:
Unlocked",
page 92
.
Create method, electrode, reagent Yes No
Copy method, electrode, reagent Yes No
Program sequence, method, elec-
trode, reagent Yes No
Delete method, electrode, reagent Yes No
Reset method, electrode, reagent
parameters Yes No
Reset parameters to factory settings Yes No
Select sequence, method, electrode,
reagent Yes Yes
Check method, electrode, reagent
parameters Yes Yes
Install/replace/remove reagents Yes Yes
Connect/replace/disconnect
electrodes Yes Yes
Run sequence, method, electrode and
reagent calibrations Yes Yes
Consult results Yes Yes