Radiometer Analytical TitraLab 870, Reference Manual

Page: 251 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 251
Turntable
blocked (SAC
error) The turntable has been blocked or forced and or cannot function
properly.
Remove the obstruction and press
Resume analysis (key 1 ) to
continue the sequence from the point it stopped.
Warning!
Do not change the turntable before restarting the sequence from the
beaker it stopped (key
1 ) or before restarting the sequence from the
next beaker (key 2 ). The sample changer identifies a turntable only
when a new sequence is initialized (equivalent to a keystroke on 3
End of sequence followed by 1 Run sequence ).
Type of method The type of method is selected in the Add method menu while editing
a sequence. The following types are available:
• Sample only methods,
• Electrode calibration methods,
• Reagent calibration methods,
• Blank sample methods (Yes has been selected for Blank in the Edit
method menu),
• QC sample methods (Yes has been selected for QC sample in the
Edit method menu).
User ID (Yes/No) If specified, User ID will be asked for each time an analysis is run.
Enter in:
Setup menu > Configuration
User list List of user defined methods, electrodes and reagents. The list is ini-
tialised to the preprogrammed methods, electrodes and reagents.