Radiometer Analytical TitraLab 870, Reference Manual

Page: 213 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 213
Run window Follow the measurements on this window when an analysis is in
progress. The displayed information depends on the type of the
method which is running.
Enter in:
How to run an analysis?
Refer to "Running a method", page 216 .
Refer to "Running a TIM sequence", page 218 .
Refer to "Running a SAC sequence", page 217 .
Figure 33: Run window of a titration method (End point method)
Figure 34: Run window of a Measurement method (pH)
Refer to "Run window (continued)", page 214 .
Sample name.
Name of the method and time elapsed since
measurements started or remaining time until
end of the End point delay.
Running test number and temperature
measured (if a probe is used) or entered.
Volume of titrant dispensed and measurement
value (pH or mV).
Titrant delivery speed is displayed live.
Real time curve (pH or mV = f(dispensed
volume )).
Sample name.
Method name.
Test number.
Electrode name and serial number.
Measurement stability indicator. Time elapsed
since measurements started. Temperature
measured (if a probe is used) or entered.
pH live measurement.