Select Edit to change specific output values
3.4.7. Curves
The curve can be used to modify the control response in the Inputs, Mixes, or Outputs page.
Standard curves containing Expo and Differential can be used directly in these sections. This
page is used to customize any kind of curve.
Up to 32 curves could be set per model.
The curve can be between 2 and 17 points and can have a fixed or user-definable x coordinate.
X value represents input, such as the course of the gimbal from low to high
Y value represents output, such as the process of channel output from low to high
Name
：
Name the curve, easy to find when recalling the curve in other settings
