3.
Model Settings
3.1.
Model Select
Pressing the
[MDL]
button from the Main view will open the
Model Select
screen.
Use the
[Roller]
or
[Dial]
to scroll through the model slots.
Pressing
[Enter]
on an empty model slot will give you the following options:
•
Create Model
- This option creates a new model with the default configuration options.
•
Restore Model
- This option creates a new copy of a selected model that has been previously backed up.
Pressing
[Enter]
on an occupied model slot that is not the active model (not marked with an asterix
*
) will
give you the following options:
•
Select Model
- this option selects this model as the active model.
•
Backup Model
- This option makes a copy of the model in the
Backup
folder on the SD Card.
•
Copy Model
- This option makes an exact copy of the model and allows you to select which model slot it will
be placed in.
•
Move Model
- This option allows you to move the selected model to a different model slot.
•
Delete Model
- This option deletes the selected model.
Pressing
[Enter]
on an occupied model slot that is the active model (marked with an asterix
*
) will give you
the following options:
•
Move Model
- This option allows you to move the selected model to a different model slot.
•
Copy Model
- This option makes an exact copy of the model and allows you to select which model slot it will
be placed in.
•
Backup Model
- This option makes a copy of the model in the
Backup
folder on the SD Card.
3.2. Setup
The
Setup
screen is where you start to configure your model. It contains the following settings:
Name
- Name of the model. The maximum number of characters is 10.
Summary of Contents for MT12
Page 5: ...1 3 Radio overview...