RadioLink Electronic Ltd
12
2.2 Language "LANGUAGE"
Both English and Chinese version menu are available for which
is convenient for Chinese and English-speaking players
to personalize function menus.
(1) Access the function menu (By pressing “Exit” and “Enter”
buttons simultaneously and holding them down for one second), the
Language select function will be chosen.
(2) Press “Enter” button to get into “LANGUAGE” function interface.
(3) Use“Dec(-)”or “Inc(+)”key to select “
中文
”or “English”, the selected
language will be with black shading effect.
(4) Press “Enter” button, the desired language is selected, Numbers at the bottom means the current firmware
version. Eg. V6.6.7 in above picture.
2.3 Model Select "MODEL"
RC6GS V3 can store model memories for 30 models. Use
this function to call a new model. Each model can independently set the
parameters of each function.
(1) Access the function menu (By pressing “Exit” and“Enter” buttons
simultaneously and holding them down for one second), press “Enter”
key once, the Model select function will be chosen.
(2) Press “Enter” button, the current active model will be blinking.
(3) To activate a different model by pressing “Dec(-)” or “Inc(+)” button
until the desired model blinks.
(4) Press “Enter” button, the selected model stops blinking, now the model has been selected.
(5) Return to the initial screen by pressing “Exit” button twice.
2.4 End Point Adjust "EPA"
Use EPA when performing left and right steering angle adjustments,
throttle high side/brake side operation amount adjustment, and channel
3 servo up side/down side operation amount adjustment during linkage.
Correct the maximum steering angle and left and right steering angles
when there is a difference in the turning radius due to the
characteristics, etc. of the vehicle.
Setting item (channel and direction)
Steering EPA
Throttle EPA
ST:0%~120%(left/ right)
TH:0%~120%(forward/brake)
Initial value:100%
Initial value : 100%
Aux Servo EPA
Aux Servo EPA
CH3:0%~120%(left/ right)
CH4:0%~120%(left/ right)
Initial value: 100%
Initial value: 100%
