background image

RadioLink Electronic Ltd

www.radiolink.com

1

Thanks for purchasing RadioLink 8-channel dual antenna receiver R8FG.

To fully enjoy the benefits of this product and ensure safety, please read the introduction carefully

and set up the device as instructed steps.

If any problems found during the operation process, either way listed below can be used as online

tech support.

1. Send mails to [email protected] and we will answer your question at the earliest.
2. Send private message to us on our Facebook page or leave comments on our YouTube page
3. If the product is purchased from the local distributor, you can also ask them for support and repair

as prefer.

All manuals and firmwares are available on RadioLink official website www.radiolink.com and more
tutorials are uploaded. Or follow our Facebook and YouTube homepage to stay tuned with our latest
news.

Facebook

YouTube

SAFETY PRECAUTIONS

Never operate your model during adverse weather conditions. Poor visibility can cause
disorientation and loss of control of your model.

Never use this product in a crowd and illegal area.

Always ensure the trim levers at 0 and battery properly charged before connecting the receiver.

Always check all servos and their connections prior to each run.

Always be sure about turning off the receiver before the transmitter.

WARNING

This product is not a toy and is

NOT

suitable for children under the age of 14. Adults should keep the

product out of the reach of children and exercise caution when operating this product in the presence of
children.

Water or moisture may enter the transmitter inside through gaps in the antenna or joystick and cause

model instability, even out of control. If running in the wet weather(such as game) is inevitable, always
use plastic bags or waterproof cloth to cover the transmitter.

Summary of Contents for R8FG V2.1













Reviews: