RadioLink F121 Pro, User Manual

Page: 16 / 19

RadioLink Electronic Limited
www.radiolink.com
14
Chapter 5 Image Transmission of F121 Pro
The image transmission device of F121 Pro is 5.8G 25mW all-channel camera integrated image transmission. If
it’s the image transmission version purchased, the binding between F121 and the FPV screen has been done by
factory default. Pilots only need to power both on before flight.
The default transmission power is 25mW. Available power among 25mW,100mW and 200mW can be changed
by pressing the button on the camera. More instructions about setting the power, please visit
www.radiolink.com
for detailed manual.
Note As device of image transmission includes transmit and receive, the distance could be influenced by the
gain of transmit and receive.
Definition of the image transmission LED indicator
①
Both RED and BLUE LED always on means normal working status.
② If RED LED is always on while BLUE is off, meaning it’s at PitMode. That is, transmission off. The
transmission distance is 1-2m. It’s advised to choose this mode if there are many people switching channels
simultaneously at the same space so that channels won’t get mixed.
Customize the power and the channel frequency
After powering on, wait for 10 seconds to initialize, both RED and BLUE LED always on means normal working
status. Long press the channels/power switching button, the frequency, the band and the transmit power will
recycle.
Table of Band/Frequency
Frequency Selection:
L
ong press the channels/power switching button for 5 seconds, the RED LED flashes
once means entering the frequency selection mode, then short press the button again to change the frequency.
Band/Freq 1 2 3 4 5 6 7 8
A 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M
B 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M
C 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M
D 5740M 5760M 5780M 5800M 5820M 5840M 5860M 5880M
E 5658M 5695M 5732M 5769M 5806M 5843M 5880M 5917M
F 5362M 5399M 5436M 5473M 5510M 5547M 5584M 5621M