21
model type and reduce possible crash by wrong model type using.
Format to name a model:
•the name can be more than 9 characters
•every character can be letter, number, blank or special characters
•factory setting name MODEL-XXXX will be shown as (example model 1 display MODEL-0001)
COPY
→
PC
Turn on the function when you need to copy the data of the model to computer to avoid data reset. Connect
the transmitter with computer and use the RadioLink official app to copy the data.
2.3 Model Type
Model Type is to select models, reset and some other functions.
Data reset
All set data can be reset to factory setting. This function will not delete all model type set in the radio.
Setup step:
Enter the basic menu for MODEL TYPE, use dial to choose a proper type and press PUSH for one
second, when the screen displays “are you sure”, press PUSH and the radio will beep, and it is set to
factory data.
Caution: don’t power the radio off before setting is finished, or the setting is invalid. The reset is only for this type.
If you want to reset all settings, you need to reset every type.
Type
You can choose the suitable type according to your model, including helicopter, acrobasic,
glid(2A+1F), glid(2A+2F), multirotor, car and boat.
Setup step:
Enter the basic menu for TYPE, use dial to choose a proper type and press PUSH for one second, when
the screen displays “are you sure”, press PUSH.
Different models have different advantages. For example:
Fixed wing models: idle down
、
throttle shut
、
throttle needle mix,snap roll etc.
Glider: different tail type, 5 individual flight conditions etc.
Car: A.B.S. etc.
You can choose the suitable models to get different functions.
Function
name
Functions
Suitable
type
AILE-2(ACRO
When the mix function is not turned on, choose “CH6 or 7” or “CH6&5”. ACRO
Example
Select Model 5, copy the data of Model 5 to Model 3, and change the name of
Model 5 to A-560
Steps
Go to BASIC MENU- MODEL SEL- SELECT. Short press Push and turn it to 05. Long
press Push for one second to confirm.
Go to COPY. Short press Push and turn it to 03. Long press Push for one second to
copy the data of Model 5 to Model 3.
Go to NAME. Press Push and turn Push to choose character to name the model.
