BridgeLINK-Pro™ Installation Guide
Page 17
© 2003 - RadioLAN Marketing Group, Inc.
Power Connection Sequence
Apply Power to the BPU
Apply Power to the BPU
Connect the Power Adapter to the PoE Adapter and the electrical wall outlet. If the BPU is properly
powered, the external LED will illuminate green, and the LED on the Ethernet jack will illuminate as well.
Once the connection to the distant BL-PRO is made, the external LED will flash orange.
10BaseT Ethernet Port Jack
10BaseT Ethernet Port Jack
The 10BaseT port on the PoE Adapter interfaces the BridgeLINK-Pro
to the Local Area Network (LAN). The 10BaseT port is RJ45-
compatible, which allows an eight-wire connection to a network hub
or other hard-wired external device. You may use a straight-through
or cross over cable – the BPU will automatically adjust to either type
of cable.
Attaching to the Network
Attaching to the Network
When connecting the PoE Adapter to the net work hub or PC, use a
RJ45-compatible modular cable. The cable is an eight -wire, twisted-
pair cable and should not exceed the distance limits provided by the
802.3 standard. After routing the cable, insert the modular connector
into the port on the PoE Adapter.
Summary of Contents for BridgeLINK-Pro
Page 2: ......
