BridgeLINK-Pro™ Installation Guide
Page 15
© 2003 - RadioLAN Marketing Group, Inc.
Installing the BPU
Tools You Will Need
Tools You Will Need
Crescent Wrench, Screwdriver, screws, pencil, and measuring tape.
For a Wall Mount: Drill with drill bits, Screwdriver, screws, pencil, and measuring tape.
To align the antenna properly, you may wish to have:
Crescent wrench, a carpenter’s square, and a helper.
If your application requires that the buildings are nearly one mile apart, it may be difficult to visually
resolve the distant BL antenna. In these cases you may need a compass, GPS, local maps, or other
direction calibration equipment.
Mounting the BPU
Mounting the BPU
The BridgeLINK-Pro comes with mounting hardware to attach the BPU
to the mounting pole. Begin by inserting the four bolts into the inner
holes on the plate. With the bolts’ long ends facing away from the board,
lay the plate on top of the enclosure. Now, screw the screws into the four
holes on the outer corners of the plate, locking the plate in place on the
enclosure. Finally, slide the C-clamp onto the bolts around the pole, and
screw the 51/4” nuts onto each bolt to secure the C-clamp to the pole.
C clamp
Summary of Contents for BridgeLINK-Pro
Page 2: ......