BridgeLINK-Pro™ Installation Guide
Page 13
© 2003 - RadioLAN Marketing Group, Inc.
Wall Mount Arm
What you will need
What you will need
(2) RJ-45 Ethernet Jumper Cables
A mounting structure for each side.
Mounting Structures
Mounting Structures
The BridgeLINK-Pro’s BPU and its associated antenna may be mounted on the
antenna mast just below the antenna, or on a standard 2”-3” water pipe found on
the sides of buildings. Visually inspect the building on which you are installing
the BridgeLINK-Pro to see if a water pipe is available. If not, we recommend
using the
Wall Mount Arm
pictured here. The Wall Mount arm is easily attached
to the outer structure with lag bolts and provides a great degree of flexibility in
installing the BPU.
Often, it is best to mount on a tower to maximize range and overcome obstructions. Whether you choose
a simple pole-stand held by cinderblocks to the roof or a hundred-foot tall radio tower, you will require a
pole or bar that is 2”-4” in diameter.
Choosing the Best Mounting Height
Choosing the Best Mounting Height
The appropriate mounting height for the BPU will depend on A) the cable distance needed between the
PoE injector and the BPU, B) the level of accessibility for routing cable and mounting the BPU, and C), the
existence of a line-of-sight to the other side.
Summary of Contents for BridgeLINK-Pro
Page 2: ......
