Radioddity X6100-H1 Installation Manual Download Page 1

Page: 1 / 4

Radioddity X6100-H1 Protection Bracket Installation Guide

Preparation

Please note you need to prepare a cross screwdriver.

Installation Steps

(1)

Unscrewing the Side Panel:

Using a Phillips head screwdriver, carefully remove the four

screws that are securing the side panel. You can refer to the provided figure for visual
guidance.

Note:

Be sure to store the screws in a safe place for future use.

(2)

Positioning the Gasket:

Next, take the gasket and align it with the four screw holes from

which you just removed the screws. The provided figure can help you ensure correct
placement.

Summary of Contents for X6100-H1

Page 1: ...head screwdriver carefully remove the four screws that are securing the side panel You can refer to the provided figure for visual guidance Note Be sure to store the screws in a safe place for future...

Page 2: ...lier onto the side panel Make sure to align the handle with the screw holes Once aligned proceed to tighten the screws with the equipped hex wrench Please pay attention to the direction of the protect...

Page 3: ...roof cap This can be done by hand similar to tightening a screw Ensure it s securely fastened Note that it s important to handle all components with care to avoid any damage Happy assembling Handle Br...

Page 4: ...application 1 Remove the Protective Layer Peel off the protective layer named Back from the adhesive side of the glass Be sure not to touch the adhesive side you just exposed 2 Align the Tempered Gla...