Troubleshooting
If your dog continues to bark, test the receiver by dragging the center
probe across a rough surface for at least 10” to 12”.
If your receiver does not beep during this test
· Insure proper polarity of the battery (labeled inside receiver)
· Check battery using receiver test light.
If your receiver beeps, but your dog does not heed correction
· Use test light to verify correction is being delivered.
· Tighten the collar.
· Trim your dog’s hair at the probe contact locations.
Regular Maintenance
· Check battery using receiver test light (monthly).
· Check probes for tightness (weekly).
· Clean probes with alcohol (weekly).
· Check your dog’s neck for irritation and wash neck (daily).
Return Procedure
If your product is under warranty send it, along with a brief
description of the problem and a copy of the sales receipt to the
address below. Please remove the collar, probes and battery from the
receiver prior to shipping. Please include a daytime phone number
where you can be contacted. Ship your return via a carrier that offers
tracking capabilities. You must pay the shipping charges to us. We will
inspect the product and repair or replace at our discretion. We will pay
shipping charges for standard delivery back to you. If your product is
not under warranty please call customer service for repair estimates
and handling procedures.
BARK CONTROL
OWNERS MANUAL
Radio Systems Corporation
10427 Electric Ave.
Knoxville, TN 37932
1-800-732-2677
www.petsafe.net
400-270/3
