background image

3

9

*'0

"

6*'

"

#

.#4/

"

5

170&5

The alarm sounds with the corresponding 
alarm’s LED indicator flashing. 

Alarm 1 and Alarm 2 have different beeping 
sounds. The duration for each alarm is 2 
minutes.

To turn off the alarm, slide 

ALARM ON/OFF

 to 

OFF

. Slide it to 

ON

 to reset the alarm to sound 

at the same time the next day. Or press 

SNOOZE/ALARM STOP

 located on the top of 

the clock.

When you set both alarms to sound at 
different times, press and hold 

SNOOZE/

ALARM STOP

 for 2 seconds

 

to turn off the 

corresponding alarm that is beeping. The 
alarm will stop and sound again at the same 
time the next day.

When both alarms are beeping, press and 
hold 

SNOOZE/ALARM STOP

 for 2 seconds to 

turn off both alarms.

75+0)

"

5011<'

"

To temporarily turn off the alarm for about 9 
minutes, tap on the 

SNOOZE/ALARM STOP 

button once on top of the clock while the 
alarm sounds. The alarm stops and sounds 
in about 9 minutes. You can repeat the 
snooze alarm by pressing 

SNOOZE/ALARM 

STOP

 when the alarm sounds next time.

.19

"

$#66'4;

"

.'8'.

"

&'6'%6+10

"

If a battery is not installed, the LOW BAT. 
indicator appears solid.

The clock detects the battery level —

• at 12:00 pm daily

• when AC power recovers from failure, 

• when the clock is connected to power

When the clock detects the battery level, a 
load of around 5mA is drawn directly from the 
battery. If the clock detects a low battery 
voltage, the LOW BAT. indicator appears 
solid.

52'%+(+%#6+105

"

Atomic frequency  ...........................  60kHz WWVB

Time accuracy ............... 1/1000 sec. / 3,000 years

Time accuracy ......................  

± 

1 sec./ day at 25 C

Power Requirement  ...................... AC 120V, 60Hz

Slide switch reliability ........................  3,000 cycles

at 180-200g force

Contact button  .............  1,000 times vertical press

Backup Battery  ................................  1 

×

 9-Voltage

Backup Battery Life .................................  24 hours

External Transformer  ...... AC 120V input, 4.5V 

×

 2

Output, 6-foot cable  .......................... UL approved

Alarm Sound Level  ....... 70dB (10cm from buzzer)

Snooze alarm duration ........................... 9 minutes

Alarm Duration ....................................... 2 minutes

Operating Temperature ....... 0C–40° C (32–104° F

Storage Temperature  ........  -10–60° C (14–140° F)

Specifications are typical; individual units might 
vary. Specifications are subject to change and 
improvement without notice.

Summary of Contents for 63-1416

Page 1: ... area without DST 5 66 0 6 6 1 To set the hour press and hold TIME SET and then press or press and hold Hour WAVE until the desired hour appears 2 To set the minute press and hold TIME SET and repeatedly press or press and Four Time Zones slide the time zone switch to select Pacific Standard Times PST Mountain Standard Time MST Central Standard Time CST or Eastern Standard Time EST Daylight Saving...

Page 2: ... This operation stops when the time signal is received HVGT VJG HKTUV 5 JQWTU If no signal can be received within the first three hours the clock repeats the reception every three hours until it receives a signal WVQOCVKE VKOG WRFCVG The clock automatically updates everyday at 01 00 1 00 a m and 03 00 3 00 a m and 05 00 5 00 a m If the automatic time update fails it will repeat the update every 3 ...

Page 3: ... pressing SNOOZE ALARM STOP when the alarm sounds next time 19 66 4 8 6 6 10 If a battery is not installed the LOW BAT indicator appears solid The clock detects the battery level at 12 00 pm daily when AC power recovers from failure when the clock is connected to power When the clock detects the battery level a load of around 5mA is drawn directly from the battery If the clock detects a low batter...

Page 4: ...he event of a product defect during the warranty period take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store RadioShack will at its option un less otherwise provided by law a correct the defect by product repair without charge for parts and labor b replace the product with one of the same or similar design or c refund the purchase price All replaced p...

Reviews: