43
Troubleshooting
TROUBLESHOOTING
If your phone is not performing to your expectations, please try these simple
steps first .
Problem
Solution
The CHARGE/IN USE
LED won’t illuminate
when the handset is
placed in the base.
Make sure the AC adapter is plugged into the base and wall
outlet.
Make sure the handset is properly seated on the base.
Make sure the charging contacts on the handset and base are
clean.
The audio sounds weak
and/or scratchy.
Make sure that the base antenna is in a vertical position.
Move the handset and/or base to a different location away
from metal objects or appliances and try again.
Press
CH/DEL
in the Talk mode to help eliminate background
noise.
Make sure that the handset is not too far from the base.
Can’t make or receive
calls.
Check both ends of the telephone line cord.
Make sure the AC adapter is plugged into the base and wall
outlet.
Disconnect the AC adapter for a few minutes, then reconnect it
Make sure that the handset is not too far from the base.
The handset doesn’t ring
or receive a page.
The battery pack may be weak. Charge the battery for 24
hours.
The handset may be too far from the base unit.
Place the base unit away from appliances or metal objects.
Severe noise
interference.
Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems,
intercoms, room monitors, fluorescent lights, and electrical
appliances.
Move to another location or turn off the source of interference.
The Caller ID does not
display.
The handset was picked up before the second ring.
The call was placed through a switch board.
Call your local telephone company to verify yor Caller ID
service is current.
The answering system
does not work.
Make sure the base unit is plugged in.
Make sure the answering system is turned on.
43-3827/3870.FM Page 43 Monday, June 2, 2003 11:02 AM
