Te
le
ph
on
e
Se
tu
p
Add and Register Your Handset
Your handset must be registered with the telephone base before use.
When first purchased, the handset shows
NOT REGISTERED
. You may need
to charge the handset before registering to the telephone base. For more
details on battery charging, see the table on page 3.
To register a handset:
Place the unregistered handset in the telephone base or charger.
PRESS FIND HS 4 SEC ON BASE
appears on the handset screen after a
few seconds
If
PRESS FIND HS 4 SEC ON BASE
does not appear after a few
seconds, remove the handset and place it in the telephone base or
charger again.
.
On the telephone base, press and hold
FIND HANDSET
for about four
seconds (until the red
IN USE
light on the telephone base turns on) and
then release the button.
3.
The handset shows
PLEASE WAIT...
and it takes about 10 seconds to
complete the registration.
4.
The handset shows
HANDSET X REGISTERED
(
X
represents the handset
number assigned) and a beep sounds when registration is complete.
n
Notes:
If the registration fails, the handset shows
NOT REGISTERED
. To reset
the handset, remove the handset from the telephone base and place it
back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
1.
•
•