TEKCOM Industries Limited
Page 3 of
6
In “OFF” position, your transceiver is off. Rotate this control clockwise to turn on your radio
and adjusts the volume, until you get a comfortable listening level.
2.
CH
/Key Tone Button
Press
CH
to move one channel higher. Press and hold
CH
for more than 1.5sec to enter
into the scan upwardly mode. Press
CH
will change the scanning direction.
Press
FUNC
key and hold for less than 1.5 sec, then press
CH
key to activate or deactivate
the Key Tone function. Icon “ ” will be shown if activated.
3.
CH
/ Skip / Automatic Shut Off Button
Press
CH
to move one channel down. Press and hold
CH
for more than 1.5sec to enter
into the scan downwardly mode. Press
CH
will change the scanning direction.
Skip
User can choose a desired channel from being scanned. Press
CH
or
to go to the desired
channel. Press
FUNC
key and hold for less than 1.5 sec, then press
CH
key to skip this
channel from scanning. Icon “ " ” is on to indicate this working channel is set to be skipped.
Automatic Shut Off Button
Press and hold the
CH
while turning on the radio will enable or disable the automatic shut off
timer. The display will show “
AP
ON
” when the timer is activated, or “
AP
OF
” when deactivated.
The timer automatically turns off the unit when it is idle for 2 hours.
4.
QUIET /QUIET Scan Button
Press
QUIET
button to enable or disable the
QUIET
privacy mode operation.
a)
Hold down
QUIET
button for 2 seconds until
QUIET
is displayed and the quiet code
flashes.
b)
Repeatedly press (or hold down)
CH
or
CH
until you see the code number you want
to use.
c)
Press
QUIET
button to store the code.
To turn on the quiet feature, press
QUIET
.
QUIET
appears. To turn off the feature, press
QUIET
until
QUIET
disappears.
Note:
We recommend that you select a quiet code from the range 7-30. If you select a code
below or above that range, you must wait 1 to 2 seconds after holding down
PUSH-TO-TALK
before you start talking.
QUIET Scanning