T
roubl
e
s
hoot
in
g
23
TROUBLESHOOTING
DVD S
ECTION
Problem
Suggestion
Travel Theater does not
work.
Disconnect and reconnect power to reset the Travel Theater
No power.
Make sure both ends of the power cord are securely plugged into the Travel
Theater and the power outlet.
Disc does not play.
Insert a disc with the label side facing front.
Check the type of disc to make sure it is compatible with the Travel Theater.
Both the Travel Theater and disc are coded by region. If the region codes do
not match, the disc will not play. This Travel Theater’s region code is 1.
Play starts but then
stops immediately.
Clean the disc.
Condensation has formed. Allow the Travel Theater to dry.
No sound or distorted
sound.
Make sure your Travel Theater is connected properly. Make sure all cables
are securely inserted into the appropriate jacks.
Sound is muted during
still or slow-motion play.
If you connected an audio or audio/video receiver to your Travel Theater,
make sure you chose the correct input setting on the receiver.
Remote control does not
work.
Batteries are weak. Install new batteries.
Operate the remote at a distance of no more than 20 feet (6 meters).
Remove any obstacles between the remote and the Travel Theater or other
component.
Cannot advance
through a movie.
The disc is programmed to prohibit that action.
Ì
appears.
The disc’s software restricts this action.
The disc’s software does not support that feature
The feature is not available at the moment.
You have requested a title or chapter that is out of range.
The picture is distorted.
Adjust the image setting.
Check to see that the setting in the disc menu and the setting in the Travel
Theater Display menu are compatible.
If your VCR is connected to the Travel Theater, disconnect it.
The disc might be damaged. Try another disc.
Picture is distorted
during forward and
reverse scan.
It is normal for some distortion to appear while scanning.
Subtitle and/or audio
language is not the one
selected.
If the subtitle and/or audio language does not exist on the disc, the initial
settings are not recognized. The disc’s default language is selected instead.
Set the subtitle and/or audio language manually through the setup menu.
The menu appears in a
foreign language.
The menu language preference is set to that language. Press SUBTITLE on
the remote to select the desired language.
No forward or reverse
scan.
Some discs have sections that prohibit rapid scanning, or title and chapter
skip.
If you are trying to skip through the warning information and credits at the
beginning of a movie, you cannot do so because this part of the movie is
often programmed to prohibit this.
Cannot copy discs to
video tape.
You cannot record DVD discs onto video cassettes because the discs are
encoded with anti-copy protection.
MP3 does not play.
MP3 file is corrupt.
Disc is scratched.
Your Travel Theater does not play all CD-R/ CD-RW discs.
