1. OPERATION
1-31
1.25.2
[TRAIL] menu
You can adjust the detail setting for trails on the [TRAIL] menu.
1. Right-click the [TRAIL] icon to show the [TRAIL] menu.
2. Click the required menu item.
3. Click an option for each menu.
4. Click outside the menu window to close the menu.
1.25.3
Trail mode
You can display the echo trails in true or relative motion.
True mode
The true trails show true target movements according to their over-the-ground speeds
and courses. The stationary targets do not show the trails. The true trails require a
heading signal and position data.
Relative mode
The relative trails show other ships’ movements relative to your ship. The stationary
targets also show the trails.
To select the trail mode, select the trail mode icon to switch the mode, [T-G], [T-S]
(True mode) or [REL] (Relative mode). For the ship speed mode ([T-G], [T-S]), see
"Speed menu" on page 1-57.
Note:
[T-S] is available only when [SHIP SPEED] is set to [STW].
[TRAIL] icon
MAN TUNE
FTC 1
IR 1
ES 2
EAV 3
TRAIL
2.50sec
00m03s
REL
ON
1 BACK
2 TRAIL
MODE
REL
/TRUE
3 TRAIL
LEVEL
1
/2/3/4
4 OS
TRAIL
OFF/1/2
5
TRAIL COLOR OPTION
DEFAULT/USER
Right-
click
[TRAIL]
True trails
Relative trails
Trail mode icon
[T-G]: True trail based on ground
[T-S]: True trail based on water
(at the bottom right corner on the screen)
INSTAL
AIS
FTC
IR
ES
EAV
TRAIL
2.50sec
00m03s
T-G
ON
CUSTOM3-4
INSTAL
AIS
FTC
IR
ES
EAV
TRAIL
2.50sec
00m03s
REL
REL
ON
CUSTOM3-4
Trail mode icon
[REL]: Relative mode
Click
