Digital BUS-WATCH
®
R1001 / R4001
IO Input – Transit Bus
Figure 72: Event Setup – Sensor – IO Input – Transit Bus Screen Shot
Each of the School Bus, Transit, and Custom screens has 4 settings:
NAME, DISPLAY, SET, and ALARM.
NAME:
The name of the signal connected to the DVR. The names of the
signals are entered using the data entry keyboard as shown in
Figure 58 on Page 58 and are limited to 8 characters.
DISPLAY:
The characters that are displayed on the Installers Mode Page as
shown in Figure 30 on Page 41. The display characters of the
signals are entered using the data entry keyboard as shown in
Figure 58 on Page 58 and are limited to 2 characters.
SET:
Active HIGH, Active LOW, or OFF for SENSORs 1-8,
N.O., N.C., or OFF for SENSOR 9.
ALARM:
YES or NO
Page 71 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007
