Digital BUS-WATCH
®
R1001 / R4001
USB Mode (continued)
Figure 50: System – USB Mode – Host Mode Screen Shot
HOST MODE:
Using the ENTER Key on the remote control, select the HOST
MODE. The HOST MODE allows an external USB Flash Drive to be connected.
Once the connection is established, the contents of the jump drive can be
uploaded to the MOBILE DVR Hard Drive. For a description of the files and
folders on the Hard Drive Module please reference Figure 9 on Page 8.
To upload files from the USB Flash Drive, select APPLY. Depending on
how big, or how many files are on the Flash Drive, this could take a few minutes
for the DVR to access the Flash Drive. After the DVR accesses the Flash Drive,
the DVR needs to upload the files as shown in Figure 51 on Page 55. After the
DVR uploads the files, a list of the files and folders on the Flash Drive will appear
on the screen as shown in Figure 52 on Page 55. After using the up and down
arrow buttons to choose the file, use the right arrow to bring up the file destination
options as shown in Figure 53 on Page 56. The DVR will then upload the file,
giving the user status messages as shown in Figure 54 and Figure 55 on Page 56.
When done uploading the desired files, press the EXIT key on the remote control.
The DVR will then restart and upon restarting, a series of affirmation messages
will appear as shown in Figure 56 on Page 56.
Page 54 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007