59
36000 Kraljevo, Živojina Lazića
- Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: [email protected]
Figure 1. Cross-section of the body of the boiler
CONSTRUCTION
Boiler heat exchanger is the tube three draft heat exchanger and it is constructed in the materials
which, according to thickness and quality of the materials, conform to the Standard EN303 - 5.
Only by the dimensions factory Compact unit is adjusted to manipulation in small spaces. It is
very important that, if necessary, the boiler unit can be disassembled on the site into separate
assemblies of the boiler heat exchanger, silo and the pellet conveyor. At that time the circulation
pump must be removed as well as the expansion vessel.
Pellet conveyor consists of a screw shaft made of stainless steel and the drive gear motor of high
torque of 50Nm and very low installed power of 40W.
Silo has the capacity of 50 kg of pellet. Combustion chamber is made of fireproof material. Cross
section of the boiler and the aforementioned parts can be seen in figure 1.
