Radical Sportscars SR3 XX, Owner'S Manual, Page: 13 / 56

13 QD163-1
2.1 PRE-SESSION CHECKS
Despite all the thorough checks which are carried out on all our cars before they leave the factory, it is
important you also do some basic checks before you take the car to the track for the first time.
o Torque the centre lock wheel nuts to 260lb/ft. Fit the safety retaining clips.
o Use the tyre guide to get a rough idea on cold starting tyre pressures and ensure these are set
correctly.
o Double check the fire extinguisher system is set to active (electrical specification) and the pin is out of
the lever.
o Ensure the mirrors are all in the correct position for the driver
o Dependent on weather conditions, you may need to blank off the side-pod intakes in order to
maintain recommended engine running temperatures. Running outside these temperature ranges can
he harmful to the performance of your engine.
Target engine running temperatures:
Parameter Temperature
Oil Temperature (EOT) 90° 110°C
Water Temperature (ECT) 70° 90°C