Radiant Floor Heating WA Pty Ltd
Unit 1 / 18 Profit Pass, Wangara, WA 6065
Telephone:
08 6300 0404
Email:
FLOOR HEATING WA
TS8100-DUAL-V THERMOSTAT INSTRUCTIONS
See overleaf for further setting up information
Page1
LCD symbols
Symbol
Event
The buttons are locked
Heating is turned on
Frost protection activated
Program number
Symbol
AUTO
Err
Automatic mode,
executes the programmed schedules
Event
Temporary temperature override
Economy temperature
The floor sensor is not being read by the thermostat
Configuration Menu
Alternating the Zones
Turning On/Off the Thermostat
To enter into the setting menu please follow the steps below:
Step 1
, Turn the thermostat off by pressing ;
Step 2
, Press
, you will then see menu 01.
Step 3
, Use the up and down arrows to adjust menu 01.
Step 4
, Press
to move to the next Menu,
Setp 5
, Press
to accept and store once you have all menu options set.
Menu # Feature
Explanation
Adjustment
（
press up & down buttons to adjust
）
01
Mode/Sensor selection(Zone 1 only)
This thermostat is a combination model which allows you to
choose 3 different modes.
A mode=Air Sensing Only(Has built in sensor)
AF mode=Air & Floor sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
A, AF, F
02
Maximum Floor Temp
( AF mode only) (Zone 1 only)
This is to protect the floor surface.
For Wooden floors - When the manufacturer has set a
temperature limit.
20 °C~ 40 °C (40 °C by default)
03
5+2 / 7 Day Mode
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately
01 = 5+2 day programmable
02 = 7 day programmable
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
Press
to move to the Day setting and use the up and down arrows to get to the correct day.
Press
to store and exit.
Override
NEXT
MENU
POWER
DONE
1
2
3
NEXT
DONE
Comfort temperature
Manual mode
In order to alternate between the zones you should press , the LCD
will display ZONE 1 or ZONE 2 at top left corner.
Press button to turn on/off the thermostat. When thermostat is turned
off
，
the LCD will display OFF. The outputs for all zones will be turned off.
POWER
ZONE
ver 1.1
TS8100-THTIM-DUAL-V Thermostat
Timer Instructions
LCD SYMBOLS
See overleaf for further setting up information
Page1
LCD symbols
Symbol
Event
The buttons are locked
Heating is turned on
Frost protection activated
Program number
Symbol
AUTO
Err
Automatic mode,
executes the programmed schedules
Event
Temporary temperature override
Economy temperature
The floor sensor is not being read by the thermostat
Configuration Menu
Alternating the Zones
Turning On/Off the Thermostat
To enter into the setting menu please follow the steps below:
Step 1
, Turn the thermostat off by pressing ;
Step 2
, Press
, you will then see menu 01.
Step 3
, Use the up and down arrows to adjust menu 01.
Step 4
, Press
to move to the next Menu,
Setp 5
, Press
to accept and store once you have all menu options set.
Menu # Feature
Explanation
Adjustment
（
press up & down buttons to adjust
）
01
Mode/Sensor selection(Zone 1 only)
This thermostat is a combination model which allows you to
choose 3 different modes.
A mode=Air Sensing Only(Has built in sensor)
AF mode=Air & Floor sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
A, AF, F
02
Maximum Floor Temp
( AF mode only) (Zone 1 only)
This is to protect the floor surface.
For Wooden floors - When the manufacturer has set a
temperature limit.
20 °C~ 40 °C (40 °C by default)
03
5+2 / 7 Day Mode
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately
01 = 5+2 day programmable
02 = 7 day programmable
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
Press
to move to the Day setting and use the up and down arrows to get to the correct day.
Press
to store and exit.
Override
NEXT
MENU
POWER
DONE
1
2
3
NEXT
DONE
Comfort temperature
Manual mode
In order to alternate between the zones you should press , the LCD
will display ZONE 1 or ZONE 2 at top left corner.
Press button to turn on/off the thermostat. When thermostat is turned
off
，
the LCD will display OFF. The outputs for all zones will be turned off.
POWER
ZONE
ver 1.1
TS8100-THTIM-DUAL-V Thermostat
Timer Instructions
SETTING THE CLOCK + DAY OF THE WEEK
See overleaf for further setting up information
Page1
LCD symbols
Symbol
Event
The buttons are locked
Heating is turned on
Frost protection activated
Program number
Symbol
AUTO
Err
Automatic mode,
executes the programmed schedules
Event
Temporary temperature override
Economy temperature
The floor sensor is not being read by the thermostat
Configuration Menu
Alternating the Zones
Turning On/Off the Thermostat
To enter into the setting menu please follow the steps below:
Step 1
, Turn the thermostat off by pressing ;
Step 2
, Press
, you will then see menu 01.
Step 3
, Use the up and down arrows to adjust menu 01.
Step 4
, Press
to move to the next Menu,
Setp 5
, Press
to accept and store once you have all menu options set.
Menu # Feature
Explanation
Adjustment
（
press up & down buttons to adjust
）
01
Mode/Sensor selection(Zone 1 only)
This thermostat is a combination model which allows you to
choose 3 different modes.
A mode=Air Sensing Only(Has built in sensor)
AF mode=Air & Floor sensing(Floor probe must be installed)
F mode=Floor Sensing(Floor probe must be installed)
A, AF, F
02
Maximum Floor Temp
( AF mode only) (Zone 1 only)
This is to protect the floor surface.
For Wooden floors - When the manufacturer has set a
temperature limit.
20 °C~ 40 °C (40 °C by default)
03
5+2 / 7 Day Mode
This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately
01 = 5+2 day programmable
02 = 7 day programmable
Setting the clock and day of the week
This thermostat is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start
on time. To set follow the steps below:
Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.
Press
to move to the Day setting and use the up and down arrows to get to the correct day.
Press
to store and exit.
Override
NEXT
MENU
POWER
DONE
1
2
3
NEXT
DONE
Comfort temperature
Manual mode
In order to alternate between the zones you should press , the LCD
will display ZONE 1 or ZONE 2 at top left corner.
Press button to turn on/off the thermostat. When thermostat is turned
off
，
the LCD will display OFF. The outputs for all zones will be turned off.
POWER
ZONE
ver 1.1
TS8100-THTIM-DUAL-V Thermostat
Timer Instructions
CONFIGURATION MENU
TURNING ON/OFF THE THERMOSTAT
ALTERNATING THE ZONES
See overleaf for further instructions >>>
