1.0
Introduction
Overview
The intent of this manual is to provide information regarding general safety, installation, operation,
and maintenance of this radiant tube heater. You must read and understand all instructions and
safety warnings before installing or servicing the radiant tube heater.
Heater Components
Prior to installation, verify that the heater’s gas type and voltage (as listed on the rating plate) match
that of your application. Also verify that you have received all heater components included with your
radiant tube heater. Refer to page 40 for a list of the kit contents for your series heater. Materials not
included in the heater kit contents (e.g., screws, terminals, etc.) are the responsibility of the installer.
Notify your product representative or Detroit Radiant Products of any discrepancy or missing kit
contents prior to installing unit.
Model
Number
Gas Type
(select
one)
BTU/H
(High
Fire)
BTU/H
(Low
Fire)
Length
Unit
Weight
(lbs.)
Recommended
Mounting
Height*
Radiant
Surface
Area (sq.
ft.)
36”
Baffle
Sections
HL2-DS-30-65
Nat. or Prop. 65,000
50,000
16’-4”
170
9’ to 16’
20.2
4
HL2-DS-30-80
Nat. or Prop. 80,000
52,000
16’-4”
170
9’ to 16’
20.2
4
HL2-DS-30-100
Nat. or Prop. 100,000
65,000
16’-4”
170
9’ to 16’
20.2
4
Specifications
Chart 1.1
•
HL2-DS Specifications
3
HL2-DS
Series
1.0
Introduction
•
Overview
•
Heater Components
•
Specifications
* Typical or recommended mounting heights are provided as a guideline. Actual conditions may dictate
variations from this data.
