www.
radialeng
.com
True to the Music
Radial Engineering Ltd.
®
®
True to the Music
USER GUIDE
Radial Engineering Ltd.
Elevator
™
Elevator
™
FEATURES
RADIAL ENGINEERING 3 YEAR
TRANSFERABLE LIMITED WARRANTY
RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in
material and workmanship and will remedy any such defects free of charge according to the
terms of this warranty. Radial will repair or replace (at its option) any defective component(s)
of this product (excluding finish and wear and tear on components under normal use) for
a period of three (3) years from the original date of purchase. In the event that a particular
product is no longer available, Radial reserves the right to replace the product with a similar
product of equal or greater value. In the unlikely event that a defect is uncovered, please call
604-942-1001 or email [email protected] to obtain a RA number (Return Authorization
number) before the 3 year warranty period expires. The product must be returned prepaid
in the original shipping container (or equivalent) to Radial or to an authorized Radial repair
center and you must assume the risk of loss or damage. A copy of the original invoice showing
date of purchase and the dealer name must accompany any request for work to be performed
under this limited and transferable warranty. This warranty shall not apply if the product has
been damaged due to abuse, misuse, misapplication, accident or as a result of service or
modification by any other than an authorized Radial repair center.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE
HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL EXTEND
BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE
YEARS. RADIAL SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF
THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU
LIVE AND WHERE THE PRODUCT WAS PURCHASED.
Elevator
™
User Guide - Part# R870 1152 00 / 04-2017 / V2 • © Copyright 2017
Specifications and appearance are subject to change without notice.
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam BC V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
[email protected] • www.radialeng.com
Circuit type ..................................................................100% discrete Class-A
Drag Control ............................................... Variable from 22k ~ 1 meg-Ohms
Baseline gain .......................................................Variable from unity to +9dB
Boost gain ..........................................................Variable from unity to +18dB
Mid boost ...................................................... +5dB at 1kHz, +9.5dB at 800Hz
Footswitch ............................................................ Momentary (controls relay)
Relay type .............................................................. Sealed with gold contacts
Power ..................................................................9VDC, adapter not included
Radial Elevator Specifications
GUITAR BOOSTER AND LINE DRIVER
1. 9VDC POWER: Connection for 9 volt (center negative) power adapter.
Includes a cable clamp to prevent accidental power disconnection.
2. OUTPUT: High-Z ¼” connection to your amplifier.
3. INPUT: High-Z ¼” connection from your instrument.
4. BASELINE SELECTOR: Three position switch sets the way the Elevator
handles your instrument signal when the power booster is not in use.
• TRUE-BYPASS: Takes the Elevator completely out of the signal path.
• BUFFER: Uses a unity gain buffer to drive long cables without added
noise or signal loss. Also activates the DRAG™ control.
• DRIVE PRESET: Lets you preset a baseline amount of gain.
5. DRAG: Load Correction circuit lets you replicate the tone and feel as if
connected directly to your amp.
6. DRIVE: Lets you dial-in a little extra punch and push your amp harder.
7. FOOTSWITCH: Activates the power BOOSTER. An LED indicator
illuminates when the BOOSTER is active.
8. GAIN: Controls the amount of boost applied when the BOOST footswitch
is active. Adds up to 15dB of clean gain.
9. MID BOOST: Three position switch lets you add extra mid-range for
greater sustain and stage presence.
• Position 1: OFF: No mid-range boost is applied.
• Position 2: 5dB: Applies a small amount of mid-range boost.
• Position 3: 10dB: Applies a big mid-range boost.
10. STEEL ENCLOSURE: Heavy-duty 14-gauge steel enclosure for long life.
6
7
8
9
5
4
10
1
2
3
