9
www.radialeng.com
Radial Engineering
1638 Kebet Way, Port Coquitlam BC V3C 5W9
Tel: 604-942-1001 Fax: 604-942-1010
email: [email protected]
BigShot EFX
Owner’s Manual
True to the Music
Radial Engineering is a division of C•TEC (JP CableTek Electronics Ltd.)
Radial BigShot EFX users guide V1.0 - Part #: R870 1130 00
Subject to change without notice
1
2
3
6
5
4
BigShot EFX User Guide
Radial Engineering
RADIAL LIMITED THREE YEAR TRANSFERABLE WARRANTY
Radial Engineering - a division of JP Cabletek Electronics Ltd. warrants this product to be
free from defects in material and workmanship to the original owner and will remedy any
such defects free of charge according to the terms of this warranty. Radial Engineering
will repair or replace at its option any defective component(s) of this product, excluding the
finish, the footswitch (footswitch is warranted for 90 days) and wear and tear from normal
use, for a period of three (3) years from the original date of purchase. In the event that a
particular product is no longer available, Radial Engineering reserves the right to replace
the product with a similar product of equal or greater value. To make a request or claim
under this limited warranty, the product must be returned prepaid in the original shipping
container (or equivalent) to Radial Engineering or to an authorized repair centre and you
must assume the risk of loss or damage. A copy of the original invoice showing date of
purchase and the dealer name must accompany any request for work to be performed
under this limited warranty. This limited warranty shall not apply if the product has been
damaged due to abuse, misuse, misapplication, accident or as a result of service or
modification by any other than an authorized repair centre.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE
HEREOF AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND
BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE
YEARS.
RADIAL ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPE-
CIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE
USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON
WHERE YOU LIVE.
BigShot EFX User Guide
Radial Engineering
1
2
3
4
INPUT
- ¼” jack connects the
cable from your instrument.
SEND-1 ~ RETURN-1
- ¼”
output and input jacks for the first
effects loop.
SEND-2 ~ RETURN-2
- ¼”
output and input jacks for the
second effects loop.
1
FOOTSWITCH
- turns LOOP-1
on and off.
2
FOOTSWITCH
- turns LOOP-2
on and off.
8
9
7
6
5
OUTPUT
- ¼” jack connects to
your amplifier.
LOOP-1 LIFT
- reduces ground
loop hum by disconnecting the
ground at the RETURN-1 jack.
LOOP-2 LIFT
- reduces ground
loop hum by disconnecting the
ground at the RETURN-2 jack.
LOOP-2 MUTE
- converts
LOOP-2 into a mute function to
allow silent tuning.
8
7
IMPORTANT NOTICE!
The Radial BigShot EFX is a passive switcher specifically de-
signed for use with amplifiers with proper electrical safety grounds
approved by nationally recognized electrical authorities such as UL
in the United States, CSA in Canada and other similar bodies in
countries around the world.
It is further understood that due to the unpredictable nature of
connecting any number of different amplifiers and pedals together,
using the EFX can pose a potential for electric shock, and as such,
the user is completely responsible for any and all consequences as
these are beyond our control.
You are completely responsible to ensure the safe a proper use of
the EFX and clearly understand that using the EFX confirms you
have taken full responsibility. If you are not 100% sure of your ac-
tions, please consult a qualified technician for advise before using
this device or connecting any of your equipment to it.
CAUTION: PLEASE READ THE IMPORTANT NOTICE ON
THE BACK COVER BEFORE USING THE BIGSHOT EFX
FEATURES AND FUNCTIONS
Part # R800 7204
