96
EN
27.3 Menu 9.8.3 - Setting the permanent display lighting
Pressing one of the operating buttons switches the background lighting
on the display on and off after a predetermined time.
◆
After 10 seconds on the standard display
◆
After approx. 1 minute in the menus
You can set the desired brightness level if the background lighting
should remain permanently lit up in an idle state (without pressing a
button):
1.
Open menu
9.8.3
.
2.
Set and confirm the desired brightness
levels.
0
= Deactivate the permanent display lighting
1
= low brightness
2
= average brightness
3
= maximum brightness
27.2 Menu 9.8.2 - Setting the display contrast
1.
Open menu
9.8.2
.
2.
Set and confirm the desired contrast.
1 = low contrast
10 = high contrast
