89
EN
26.6 Menu 9.6 - Configuring the blockage detection
The Troll Comfort DuoFern is able to monitor the torque of motors
equipped with a mechanical end point setting. This enables the control-
ler to switch off the motor in the event of overloading or blockage. As a
result, the roller shutter is protected from damage.
i
Blockage detection
can only be used in combination
with a tubular motor
with mechanical end point setting
.
1.
Open menu
9.6
.
2.
Activate/deactivate the blockage detection
and confirm.
On = blockage detection on *
Off = blockage detection off **
* Continue with point 3.
** After deactivation and confirmation the
display jumps back to the menu.
3.
Select and confirm the suitable
motor type.
A list of the motor types is provided
on the following page.
Please also read the instruction manual for the
tubular motor being used.
