84
EN
26.3 Menu 9.3 - Configuring the ventilation position
If you do not want the roller shutter to close fully to the lower end point,
you can use this function to configure an arbitrary position
(
e.g. as the
ventilation position
)
.
When closing automatically, the roller shutter will stop at the ventilation
position, however, it can subsequently be closed completely via manual
operation.
i
The running time must be configured prior to setting the
ventilation position, see page 82.
1.
Open menu
9.3
.
2.
Activate / deactivate the
ventilation position and confirm.
On = ventilation position on *
Off = ventilation position off **
* After activation, the current
ventilation position appears.
** After deactivation the display jumps back
to the menu.
3.
First fully open the
roller shutter.