manualshive.com logo in svg

RADEMACHER Troll Comfort DuoFern, Instruction Manual For The Electrical Connection And For Commissioning, Page: 20 / 132

Share
Download
RADEMACHER Troll Comfort DuoFern Instruction Manual For The Electrical Connection And For Commissioning Download Page 20

20

EN

i

Installation and electrical connection

The Troll Comfort DuoFern is designed as a flush-mounted device for 
indoor rooms. The electrical connection is carried out by means of the  
connecting terminals on the reverse side of the installation housing. 

Installation / compatible switch ranges

The Troll Comfort DuoFern 9485 can be integrated into standard switch 
ranges (50 x 50 mm).

i

 

It may be necessary to use an intermediate frame * 50 x 50 (accor- 
ding to DIN 49075) depending on the switch range used.

* Not included

5.  Product description

5.1  Description of the safety functions

Blockage detection

The Troll Comfort DuoFern is able to monitor the torque of motors 
equipped with a mechanical end point setting. This enables the control-
ler to switch off the motor in the event of overloading or blockage, see 
page 89.

i

Summary of Contents for Troll Comfort DuoFern





































































































































Reviews:

No comments