manualshive.com logo in svg

RADEMACHER Troll Comfort DuoFern, Instruction Manual For The Electrical Connection And For Commissioning, Page: 32 / 132

Share
Download
RADEMACHER Troll Comfort DuoFern Instruction Manual For The Electrical Connection And For Commissioning Download Page 32

32

EN

8.  Safety instructions for the electrical connection

i

 WARNING!

Using an incorrect installation housing can lead to personal injury 
and damage to property (electric shocks / short circuiting).

 

◆

Only use the installation housing provided to connect and install 
the Troll Comfort DuoFern. 

 

◆

Installation housings of other RADEMACHER products, such as other 
Troll controllers, are not compatible.

 WARNING!

Connection of a second phase to E1 or E2 will cause the Troll Com-
fort DuoFern to be damaged. 

 

◆

When using the inputs 

[

 

E1 / E2

 

]

, they must always be connected to 

the same phase 

[ L ]

 as the supply voltage. 

 

◆

 If another phase is connected, the incorrect mains voltage (380 V / 
50 Hz) will be applied to the inputs and damage the Troll Comfort 
DuoFern.

 

◆

Follow the pin assignment detailed in the connection diagram.

Summary of Contents for Troll Comfort DuoFern





































































































































Reviews:

No comments