manualshive.com logo in svg

RADEMACHER Troll Comfort DuoFern, Instruction Manual For The Electrical Connection And For Commissioning, Page: 113 / 132

Share
Download
RADEMACHER Troll Comfort DuoFern Instruction Manual For The Electrical Connection And For Commissioning Download Page 113

113

EN

28.1  Menu 9.9.1 - Logging DuoFern devices on/off

Clearing up the DuoFern network

This function enables you to log off all DuoFern devices from the Troll 
Comfort DuoFern that are no longer accessible via radio.

i

 

All battery-operated DuoFern transmitters (e.g. the 
DuoFern Manual Central Operating Unit) cannot be logged 
off using this function.

1. 

  Open menu 

9.9.1

.

  The number of logged-on  

 

DuoFern devices is displayed.

2. 

  4 sec. 

Activate the clear-up function.

   

In order to do this, press and hold the SET  

   

button for approx. 4 seconds. 

3. 

  The display flashes.

 

The current number of logged-on DuoFern  

 

devices (e.g. 2) is displayed after a successful  

 clear-up.

Summary of Contents for Troll Comfort DuoFern





































































































































Reviews:

No comments