42
EN
16.4 Setting the automatic solar function
The automatic solar function enables brightness-de-
pendent control of the roller shutters in combination
with the light sensor. To do this, the light sensor is secured
to the window pane with a suction cup and then plugged
into the RolloTron Swivel Winder Comfort.
Automatic solar function
Automatic moving up and down of the roller shutter
once a set limit is exceeded. The roller shutter end posi-
tion can be freely selected by changing the light sensor
position.
i
Please note the state of the sun icon on the
standard display.
◆
During the activated automated solar
function, the corresponding icon flashes
in the standard display as soon as sunlight
is detected.
◆
By setting the automatic solar function,
the automatic mode is automatically
switched on.
Example installation
The automatic solar function will be terminated
and must be reactivated if required after the fol-
lowing events:
◆
After manual actuation.
◆
After execution of an automatic function.
◆
After the upper end point is reached.
Summary of Contents for RolloTron Swivel Winder Comfort 1500
Page 58: ...58 EN i ...
Page 59: ...59 EN i ...
