47
3.2 Required expert knowledge of the installer
The connection for the electric roller shutter drive may only be
undertaken by an authorised qualified electrician and in accord-
ance with the connection diagrams in this manual.
The installer must ensure that the entire installation complies with
the standards in the country of commissioning. In particular, the
standards DIN EN 13659 and DIN EN 12045 must be taken into
account.
3.3 Technical terms - definition
DECT (digital enhanced cordless telecommunications)
Radio standard for the telephony and control of compatible
products.
DECT base station (FRITZ!Box)
Central control unit for DECT products. All devices in a DECT
network must be logged on.
Obstacle detection
If the roller shutter hits an obstacle in the DOWN (
t
t
) direction,
the RolloTron DECT is switched off, see page 52.
Overload cut-off
If the drive jams in the UP (
▲
▲
) direction (e.g. due to ice), the
RolloTron DECT is switched off, see page 52.
End points
An end point is set in each direction that the roller shutter trav-
els. When an end point is reached, the RolloTron DECT automat-
ically stops the roller shutter.
Running time limit - transient operation (KB)
The RolloTron DECT is not designed for continuous operation.
Transient operation defines the maximum permissible running
time, see page 45 / 75.
The installer must draw the customer's attention to the
clamping forces to be expected and to the resulting dangers
in particular.
