15
EN
i
6. Product description
The Troll Standard controller is designed for controlling roller shut-
ters, Venetian blinds, slats or awnings by connecting a corresponding
tubular motor.
Roller shutter control
The device enables the roller shutter to be automated.
Manual operation
It is possible to manually control the connected tubular motor at any
time by using the controls.
External control via two inputs E1 and E2
The Troll Standard features two inputs
E1
and
E2
(230 V / 50 Hz) for
connecting external signal transmitters or external controllers (e. g. Troll
Comfort), see page 26.
Installation and electrical connection
The Troll Standard is designed as a flush-mounted device for indoor
rooms. The electrical connection is carried out by means of the
connecting terminals on the reverse side of the installation housing.
Installation / compatible switch ranges
The Troll Standard can be integrated into standard switch ranges
(50 x 50 mm).
i
It may be necessary to use an intermediate frame * 50 x 50 (accor-
ding to DIN 49075) depending on the switch range used.
* Not included
Summary of Contents for RolloHomeControl Troll Standard 3650 03 22
Page 58: ...58 EN ...
Page 59: ...59 EN ...
