RADEMACHER DuoFern HomeTimer 9498-UW, Instruction Manual For The Electrical Connection And For Commissioning

Page: 40 / 72

40
EN
17.4 Menu 2 - Configuration of opening and closing times [ / ]
The following example shows how to config-
ure an opening and closing time for Monday
to Sunday.
1. Call up the main menu.
2.
Select and open menu 2 [ ] switching
times .
3. Select
[ Alle ] (All)
DuoFern actuators.
4. Configure the switching time mode for
the opening time [ ] :
◆
NORMAL
◆ ASTRO
◆
OFF
NORMAL
At the configured time, an [ Up ] -signal will
be sent to the assigned DuoFern actuators.
Example:
The roller shutters open at the configured
opening time.
ASTRO
The control command is sent at the daily
re-calculated dawn time. The previously
configured opening time is interpreted as
“
earliest at xx:xx hours” .
Example:
The roller shutters open at the daily re-
calculated dawn time.
If you want to configure the opening and
closing times for another
switching time
programme , first open menu 9.5 and select
the desired
switching time programme
,
see page 56.