27
EN
10. Activating the jog mode
In the jog mode, the DuoFern Multiple Wall Controller can be
used, e.g. to control Venetian blinds.
i
1.
1 sec. Activate the switching mode.
Simultaneously press and hold the
buttons 2 and 5 for 1 second.
LEDs 2 and 5 will flash red.
2.
If there is a switching mode for one of the button groups,
the according LEDs 1 to 6 will light up green.
left LED green
jog mode is deactivated
right LED green
jog mode is activated
5 sec.
Attention! The switching mode only
remains active for approx. 5 seconds.
Activate the jog mode for one button group
Morning Mood
Wellness
Roller shutters
Summary of Contents for DuoFern 9494-1
Page 34: ...34 EN i...
