manualshive.com logo in svg

RADEMACHER DuoFern 9482, Instruction Manual

Share
Download
RADEMACHER DuoFern 9482 Instruction Manual Download Page 34

34

EN

13.  Simplified EU declaration of conformity

i

RADEMACHER Geräte-Elektronik GmbH hereby declares 
that the DuoFern 1-10V Controller 9482 complies with the 
Directive

2014/53/EU

 (

Radio Equipment Directive

). 

The full text of the declaration of conformity is available at the 
following website: 
www.rademacher.de/ce

i

14.  Warranty terms and conditions

RADEMACHER Geräte-Elektronik GmbH provides a 24-month war-
ranty for new systems that have been installed in compliance with 
the installation instructions. All construction faults, material de-
fects and manufacturing defects shall be covered by the warranty.
Your statutory warranty claims remain unaffected by this warranty.

The following are not covered by the warranty:

 

◆

Incorrect fitting or installation

 

◆

Non-observance of the installation and operating manual

 

◆

Improper operation or wear and tear

 

◆

External influences, such as impacts, knocks or weathering

 

◆

Repairs and modifications by third parties, unauthorised 
persons

 

◆

Use of unsuitable accessories

 

◆

Damage caused by unacceptable excess voltage (e.g. stroke 
of lightning)

 

◆

Operational malfunctions caused by radio frequency overlap-
ping and other such radio interference

Summary of Contents for DuoFern 9482





































Reviews:

No comments

Brands by name

Popular brands

Load more brands