18
EN
i
6.3 Description of the functions and parameters
Setting the dimming speed
This sets the time which the 1-10V output requires to get from
0 % to 100 %. The possible adjustment range is 2 to 255 seconds.
i
If the "Save intermediate value for a manual stop"
function is activated, the dimming speed should not
be set too fast for convenient use.
◆
This parameter can be set with the HomePilot® or
the manual control.
Intermediate value function (on / off)
If the intermediate value function is activated, the configured
intermediate value is set first with an UP command. If you press
“UP” again, the value is set to 100 %. The DOWN command works
in a corresponding manner.
i
This function can be set with the HomePilot®
.
Setting the intermediate value for a manual stop (on / off)
This parameter can be used to set whether the current value con-
figured by a stop command during dimming should be saved as
a new intermediate value or not.
i
This function can be set with the HomePilot®
.
