RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning Download Page 35

Page: 35 / 128

7. Safety instructions

The use of defective equipment can lead to personal injury
and damage to property (electric shocks / short circuiting).

◆

Never use defective or damaged equipment.

◆

Check that the DuoFern Room Thermostat 9485 is intact.

◆

Consult our customer service department in the event that
you discover damage, see page 128.

Improper use leads to an increased risk of injury.

◆

Train all personnel to use the DuoFern Room Thermostat
9485 safely.

◆

Children must not play with the device.

◆

Never remove the operating unit from the installation
housing during operation.

Risk of damage due to the overheating or excessive cooling
of the room or flooring.

The relay output remains unchanged if the operating unit is
pulled out of the installation housing during operation. Control
and limiting functions where appropriate are no longer provided.

◆

Make sure that a relay state that poses no risk is set before
removing the operating unit.

◆

Switch off the central heating or air conditioning
beforehand if necessary.

Summary of Contents for 9485

































































































































Search results

Summary of Contents for 9485

Reviews:

Related manuals for 9485

Brands by name

Popular brands

RADEMACHER 9485, Instruction Manual For The Electrical Connection And For Commissioning

Search results

Summary of Contents for 9485

Reviews:

Related manuals for 9485

Brands by name

Popular brands