10
i
EN
The
Troll Basic DuoFern
serves as a
DuoFern receiver
for controlling roller shutters, Venetian
blinds, slats or awnings by connecting a corresponding tubular motor.
The Troll Basic DuoFern can be controlled individually on site or it can be integrated into a
DuoFern network.
Central control of DuoFern devices with a HomePilot®
or DuoFern manual central
operating unit.
A
DuoFern network
generally includes the
HomePilot®
or the
DuoFern manual central
operating unit
as central controllers.
The DuoFern receivers (actuators) and transmitters must be connected to the
DuoFern network.
NOTE
You can find a detailed description of the various functions, configuration options and possible
combinations for the DuoFern system at:
http://www.rademacher.de/duofern
Roller shutter control
The system enables roller shutters to be automated.
Manual operation (normal mode)
It is possible to manually control the connected tubular motor at any time by using the controls.
Manual operation (jog mode)
If Venetian blinds mode is activated for the DuoFern network from an overriding controller,
then manual operation can also be undertaken on site in jog mode.
External controller via the two inputs E1 and E2
The
Troll Basic DuoFern
features two configurable inputs
E1
and
E2
(230 V / 50 Hz) for
connecting an external switch (e.g. Venetian blinds switch, etc.), see page 17.
6. Brief description
