88
EN
25.7 Menu 9.7 - Setting the Venetian blind mode
This function enables you to use the Troll Comfort or Troll Comfort 3D to
control a Venetian blind.
The following configurations are possible:
◆
Jog mode
◆
Automatic slat adjustment
◆
Tilting time
Brief description of jog mode
Tapping the operating buttons briefly enables Venetian blind slats to be
conveniently configured.
In order to conveniently move the Venetian blind to the end points,
actuate the control button for 1 second longer than the configured
tilting time. Once the button is released, the Venetian blind will move to
the end point without stopping.
Brief description of the automatic slat adjustment function
If the Troll Comfort or Troll Comfort 3D controls the Venetian blind
motor in the
down-direction
until the total run time has elapsed or
the Venetian blind motor is stopped manually, then the motor reverses
automatically for a brief period (automatic slat adjustment). This serves
to position the slats to the desired angle in order to provide sun shading
to the room.
i
If the motor is actuated by the automatic sun function to
the sunshine position, then automatic slat adjustment is
not executed. The light sensor must be mounted as low as
possible under the configured sunshine position.
T
Summary of Contents for 3650 00 12
Page 111: ...111 EN i ...
