manualshive.com logo in svg

RADEMACHER 3514 06 63, Instruction Manual

Share
Download
RADEMACHER 3514 06 63 Instruction Manual Download Page 20

20

EN

i

8.    Safety instructions for the electrical connection

 WARNING!

 WARNING!

Short-circuiting,  caused  when  the  DuoFern  Motor  

Actuator 9471- 2 is overloaded, poses a danger to life.

 

◆

The maximum switching capacity must not be exceeded. 

Please observe the details in the “Technical Specifications”, 

see page 14. 

Prior  to  the  electrical  connection,  check  that  the  voltage  / 

frequency on the type plate corresponds to that of the local 
mains supply.

 DANGER!

There is a risk of fatal electric shock when touching 

electrical components. 

 

◆

All connection and installation work must only be carried 

out in a de-energised state.

 

◆

Disconnect all phases of the mains power lead and secure it 

to prevent any reconnection.

 

◆

Check that the system is de-energised.

 ATTENTION!

A defective antenna can lead to malfunctions or failure of 

the DuoFern Motor Actuator 9471- 2.

 

◆

The antenna lead must not be shortened and damaged.

Summary of Contents for 3514 06 63

































Reviews:

No comments

Brands by name

Popular brands

Load more brands