Tab. 3.2: MODE selector
Description
MODE
RipEX2 unit "A" hard selected – it remains
active even in case of alarm on unit "A"
A
AUTO mode – A unit active till an alarm status
on "A" unit occurs, which causes switching to
unit "B".
AUTO
RipEX2 unit "B" hard selected – it remains
active even in case of alarm on unit "B"
B
For more details see
Chapter 2, RipEX2-HS in detail
Note
When testing the changeover, please wait at least 30 seconds between individual tests.
3.3. Rear panel
Fig. 3.8: RipEX2-HS/RD/RS rear panel
RipEX2-HS – © RACOM s.r.o.
16
Product
Summary of Contents for RipEX2-HS
Page 2: ......
