3.2. Front panel RipEX2-HS
Fig. 3.4: RipEX2-HS front panel
3.2.1. Connectors available on front panel
All connectors for RipEX2 units are described in RipEX2 User manual (
Chap. 1.2
)
Connectors of the RipEX2-HS are splitted to three sections HS unit, "A" unit and "B" unit.
Fig. 3.5: HS unit
Connectors of this sections serves as connection with external equipment.
Description of each connector is the same as with RipEX2 unit and you can find it in RipEX2 manual.
ETH1 and ETH5 (SFP) are connected to an internal switch, for connection of both ETH to the individual
RipEX2, units the ETH1 connector in A unit and B unit section shall be used.
12 pin connector
(Type of plug Phoenix Contact 1790331)
Pin description
This input is connected to the SI pin on power connector of the active RipEX2
unit
SI Sleep input
This input is connected to the SI pin on power connector of the active RipEX2
unit
AI Alarm input
13
© RACOM s.r.o. – RipEX2-HS
Product
Summary of Contents for RipEX2-HS
Page 2: ......
