•
Link Management – Setings
IP health check
– this feature is prepared for switching between profiles or lines. MG102 is
checking availability of Monitored host 1 (optionaly 2). If the host (hosts) is (are) not reachable the
second profile (link) will be switched to.
Note
This functionality has a close relationship with Connection Supervisor.
Description
Parameter
The required signal strength for GSM/UMTS in order to qualify the link as a fallback
alternative.
Mobile:
The required signal strength for WLAN in order to qualify the link as a fallback al-
ternative.
WLAN:*
Specify whether the Signal strength LEDs on the MG102 front panel shall indicate
the WLAN or mobile signal strength.
Signal strength
LED shows:
Note
WLAN is available only with relevant HW.
IP health check option is not used at M!DGE.
21
© RACOM s.r.o. – MG102, M!DGE, GPRS/EDGE/UMTS routers
Configuration