RACOM MG102i, Operating Manual

Page: 151 / 175

> help
Usage:
help [<command>]
Available commands:
get Get config parameters
set Set config parameters
update Update system facilities
cert Manage keys and certificates
status Get status information
scan Scan networks
send Send message, mail, techsupport or ussd
restart Restart service
debug Debug system
reset Reset system facilities
reboot Reboot system
shell Run shell command
help Print help for command
no-autologout Turn off auto-logout
history Show command history
exit Exit
8.3. Getting config parameters
The
get
command can be used to get configuration values (not the current values).
get -h
Usage:
get [-hsvfc] <parameter> [<parameter>..]
Options:
-s generate sourceable output
-v validate config parameter
-f get factory default rather than current value
-c show configuration sections
See the following example for reading configuration DIO values:
> get dio.out1
dio.out1=on
> get dio.out2
dio.out2=on
8.4. Setting config parameters
The
set
command can be used to set configuration values.
> set -h
Usage:
151 © RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
Command Line Interface